get the ssid and password valvues

get the ssid and password valvues

hello everyone i just started looking into what iotappstory can do and i am inpressed. i want to implement this library into my current project using blynk. in my code i have

"Blynk.begin(auth, ssid, pass);"

simple question but what do i put in there where the ssid and password fields are. hopfully u understand my question thanks!

here is the blynk code

/*************************************************************
  Download latest Blynk library here:
    https://github.com/blynkkk/blynk-library/releases/latest

  Blynk is a platform with iOS and Android apps to control
  Arduino, Raspberry Pi and the likes over the Internet.
  You can easily build graphic interfaces for all your
  projects by simply dragging and dropping widgets.

    Downloads, docs, tutorials: http://www.blynk.cc
    Sketch generator:           http://examples.blynk.cc
    Blynk community:            http://community.blynk.cc
    Follow us:                  http://www.fb.com/blynkapp
                                http://twitter.com/blynk_app

  Blynk library is licensed under MIT license
  This example code is in public domain.

 *************************************************************
  This example runs directly on ESP32 chip.

  Note: This requires ESP32 support package:
    https://github.com/espressif/arduino-esp32

  Please be sure to select the right ESP32 module
  in the Tools -> Board menu!

  Change WiFi ssid, pass, and Blynk auth token to run :)
  Feel free to apply it to any other example. It's simple!
 *************************************************************/

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial

/* Fill-in your Template ID (only if using Blynk.Cloud) */
//#define BLYNK_TEMPLATE_ID   "YourTemplateID"

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "YourAuthToken";

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "YourNetworkName";
char pass[] = "YourPassword";

void setup()
{
  // Debug console
  Serial.begin(9600);

  Blynk.begin(auth, ssid, pass);
}

Hi @danhoo

I am not a Blynk user but Arduino IOT Cloud.  If I understand your question, I hope this helps!

You have an Auth token from sertting up your Blynk account?

then that goes in here:

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "YourAuthToken";

Your ESP32 board cannot connect directly to the Blynk through the Internet, it has to connect through your home WiFi router to the internet or via a 'hotspot' on your mobile phone.  So you need to use the WiFi credentials only known to you

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "YourNetworkName";
char pass[] = "YourPassword";

The software willtake the 3 values you have entered and put them into the Blynk.begin call arguments at run time.  You don't change that line in your code.

 Blynk.begin(auth, ssid, pass);

The written knowledge test evaluates an applicant's understanding of road signs, traffic laws, and safe driving practices. The practical road test assesses their ability to apply this knowledge in real-world driving situations. In some areas, there may also be additional tests focusing on specific skills, such as parallel parking or highway driving. https://community.umidigi.com/forum.php?mod=viewthread&tid=26115

If you're trying to connect to a network you're authorized to use (such as at a workplace or a friend's house), ask the network administrator or the connections owner for the SSID and password.

Remember to replace "YourAuthToken" with the actual authentication token from your Blynk project. If you haven't created a Blynk project or obtained an authentication token, mapquest driving directions you can do so through the Blynk app.

Would you want something with a lot of thrills and spills? Afterwards, Slope game 3d is a blast! The whole game has only one gameplay mode. You'll be playing nonstop since it's an unlimited mode. Strive to score a goal. Sliding carelessly down a hill near an obstacle course full of slippery blocks is the most exciting thing ever.

It's awesome that you're diving into IoTAppStory for your project! Integrating it with Blynk sounds like a solid plan. So, about that line of code you mentioned, "Blynk.begin(auth, ssid, pass);", the ssid stands for the name of your WiFi network, and pass is your WiFi password. Just make sure to replace ssid and pass with your actual WiFi credentials.

By the way, have you checked out smartwatches with diabetes-friendly features? They're pretty cool and can be super helpful for managing health on the go!

13 Ways to Unwind and Destress After a Long Day